CalcHub
BlogAboutContact
Sign InSign Up

CalcHub is a product of ThinkStack Labs. © 2026 ThinkStack Labs. All rights reserved.

About UsContact & SupportPrivacy PolicyTerms of Service
    HomeBlogHome ImprovementHow to Calculate Concrete Volume for Slabs, Footings & Posts
    Back to Blog
    Home Improvement

    How to Calculate Concrete Volume for Slabs, Footings & Posts

    Published on August 5, 20242 min readBy CalcHub Financial Engine
    #concrete#construction#diy#patio
    Try the Related Calculator!
    Run your numbers with our free, interactive tool.
    How to Calculate Concrete Volume for Slabs, Footings & Posts

    Pouring concrete is one of the most unforgiving DIY home improvement projects. Unlike painting or framing, where you can easily pause and resume, once concrete is poured, you are on a strict biological countdown before it begins to set. If you underestimate your volume and run out of concrete midway through a pour, you end up with a structurally defective "cold joint." If you over-order, you end up paying disposal fees for concrete you can't use.

    The Fundamental Concrete Equation: Cubic Feet to Cubic Yards

    In North America, ready-mix concrete suppliers sell concrete by the cubic yard (often simply called a "yard"). One cubic yard is a cube that measures 3 feet by 3 feet by 3 feet, which equals exactly 27 cubic feet.

    To calculate the concrete needed for any rectangular slab or trench:

    1. Measure Length and Width in feet.
    2. Convert Slab Depth (thickness) from inches to feet by dividing by 12.
    3. Multiply Length × Width × Depth (in feet) to find total Cubic Feet.
    4. Divide total Cubic Feet by 27 to get Cubic Yards.
    5. Add a 10% safety buffer for uneven soil subgrade, form bowing, and spillage.

    Worked Example: 12ft × 20ft Backyard Patio Slab

    Let's say you're pouring a 12 ft by 20 ft patio slab at a standard 4-inch residential thickness.

    • Surface Area: 12 ft × 20 ft = 240 square feet.
    • Depth in Feet: 4 inches ÷ 12 = 0.333 feet.
    • Cubic Feet: 240 sq ft × 0.333 ft = 80 cubic feet.
    • Cubic Yards: 80 cu ft ÷ 27 = 2.96 cubic yards.
    • Adding 10% Waste Factor: 2.96 × 1.10 = 3.26 cubic yards.

    In this scenario, you should order 3.5 cubic yards from your local ready-mix supplier.

    Bagged Concrete vs. Ready-Mix Truck Delivery

    If you choose to mix your own concrete using premixed dry bags from a home improvement retailer:

    • 80 lb Bags: Yield approximately 0.60 cubic feet. It takes 45 eighty-pound bags to make 1 cubic yard.
    • 60 lb Bags: Yield approximately 0.45 cubic feet. It takes 60 sixty-pound bags to make 1 cubic yard.

    For the 12×20 patio above (3.26 cubic yards), mixing by hand would require 147 eighty-pound bags! For any pour exceeding 1 to 1.5 cubic yards, ordering a delivery truck is significantly more cost-effective, uniform, and physically manageable.

    Interactive Tool: Use our Concrete Slab Calculator to calculate your exact yardage and subbase requirements in seconds.

    PreviousHow Much Paint Do I Need for a 3-Bedroom House?Next The Complete Guide to Calculating Your Total Daily Energy Expenditure (TDEE)

    You Might Also Like

    Concrete Estimating Guide: Slab, Footing & Sonotube Math
    Home Improvement
    Concrete Estimating Guide: Slab, Footing & Sonotube Math
    Learn how to accurately estimate concrete cubic yards, 80-lb bag counts, sub-base gravel, and rebar for slabs and Sonotube footings.
    November 12, 2026
    How to Calculate Renovation Materials: Paint, Drywall & Flooring
    Home Improvement
    How to Calculate Renovation Materials: Paint, Drywall & Flooring
    Learn how to accurately estimate paint, drywall, and flooring for your room renovation to avoid waste, control costs, and finish on time.
    October 1, 2026
    How to Calculate Roofing Shingles & Materials: Complete Guide
    Home Improvement
    How to Calculate Roofing Shingles & Materials: Complete Guide
    Learn how to estimate asphalt shingle bundles, underlayment rolls, and roofing squares with this step-by-step guide and worked calculation example.
    September 22, 2026
    On This Page
    • The Fundamental Concrete Equation: Cubic Feet to Cubic Yards
    • Worked Example: 12ft × 20ft Backyard Patio Slab
    • Bagged Concrete vs. Ready-Mix Truck Delivery
    Try the Related Calculator!
    Run your numbers with our free, interactive tool.